Homepage / Productos / Herramientas de Corte / Plaquitas / Insertos para Torneado / VCMT
Productos

VCMT

Buscar productos:
Referencias disponibles
Escalas disponibles
Milímetros
Pulgadas
  • Order Code Referencia
  • 1121775L8 PLAQUITA VCMT 110302-FM PH5125 INSERT VCMT 220.5-FM PH5125 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,2
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 05-30
    Vc 124-267
    407-876     m/min
    sfm
    Fz 0.03-0.13
    0.0012-0.0051     mm/r
    in/r
    ap 0.07-1.50
    0.0028-0.0591     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0079
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 05-30
    Vc 124-267
    407-876     m/min
    sfm
    Fz 0.03-0.13
    0.0012-0.0051     mm/r
    in/r
    ap 0.07-1.50
    0.0028-0.0591     mm
    in
  • 112177567 PLAQUITA VCMT 110302-FM PH6325 INSERT VCMT 220.5-FM PH6325 Orden
    Coating PVD
    D (mm) 6,35
    Re (mm) 0,2
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 10-30
    Vc 115-212
    377-696     m/min
    sfm
    Fz 0.03-0.13
    0.0012-0.0051     mm/r
    in/r
    ap 0.07-1.50
    0.0028-0.0591     mm
    in
    S 05-25
    Vc 45-181
    148-594     m/min
    sfm
    Fz 0.03-0.13
    0.0012-0.0051     mm/r
    in/r
    ap 0.07-1.50
    0.0028-0.0591     mm
    in
    Coating PVD
    D (inch) 0,25
    Re (inch) 0,0079
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 10-30
    Vc 115-212
    377-696     m/min
    sfm
    Fz 0.03-0.13
    0.0012-0.0051     mm/r
    in/r
    ap 0.07-1.50
    0.0028-0.0591     mm
    in
    S 05-25
    Vc 45-181
    148-594     m/min
    sfm
    Fz 0.03-0.13
    0.0012-0.0051     mm/r
    in/r
    ap 0.07-1.50
    0.0028-0.0591     mm
    in
  • 112177554 PLAQUITA VCMT 110302-FM PH6910 INSERT VCMT 220.5-FM PH6910 Orden
    Coating PVD
    D (mm) 6,35
    Re (mm) 0,2
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 05-10
    Vc 124-230
    407-755     m/min
    sfm
    Fz 0.03-0.13
    0.0012-0.0051     mm/r
    in/r
    ap 0.07-1.50
    0.0028-0.0591     mm
    in
    Coating PVD
    D (inch) 0,25
    Re (inch) 0,0079
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 05-10
    Vc 124-230
    407-755     m/min
    sfm
    Fz 0.03-0.13
    0.0012-0.0051     mm/r
    in/r
    ap 0.07-1.50
    0.0028-0.0591     mm
    in
  • 1121776L8 PLAQUITA VCMT 110302-FP PH5125 INSERT VCMT 220.5-FP PH5125 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,2
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    P 10-35
    Vc 131-290
    430-951     m/min
    sfm
    Fz 0.03-0.13
    0.0012-0.0051     mm/r
    in/r
    ap 0.07-1.50
    0.0028-0.0591     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0079
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    P 10-35
    Vc 131-290
    430-951     m/min
    sfm
    Fz 0.03-0.13
    0.0012-0.0051     mm/r
    in/r
    ap 0.07-1.50
    0.0028-0.0591     mm
    in
  • 1121777L5 PLAQUITA VCMT 110304-FK PH5705 INSERT VCMT 221-FK PH5705 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    K 05-15
    Vc 179-382
    587-1253     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    K 05-15
    Vc 179-382
    587-1253     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
  • 1121778L8 PLAQUITA VCMT 110304-FM PH5125 INSERT VCMT 221-FM PH5125 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 05-30
    Vc 121-253
    397-830     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 05-30
    Vc 121-253
    397-830     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
  • 112177867 PLAQUITA VCMT 110304-FM PH6325 INSERT VCMT 221-FM PH6325 Orden
    Coating PVD
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 10-30
    Vc 112-201
    367-659     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
    S 05-25
    Vc 40-159
    131-522     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
    Coating PVD
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 10-30
    Vc 112-201
    367-659     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
    S 05-25
    Vc 40-159
    131-522     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
  • 1121779L7 PLAQUITA VCMT 110304-FP PH5115 INSERT VCMT 221-FP PH5115 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    P 01-30
    Vc 136-304
    446-997     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    P 01-30
    Vc 136-304
    446-997     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
  • 1121779L8 PLAQUITA VCMT 110304-FP PH5125 INSERT VCMT 221-FP PH5125 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    P 10-35
    Vc 127-276
    417-906     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    P 10-35
    Vc 127-276
    417-906     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.50
    0.0039-0.0591     mm
    in
  • 1121780L7 PLAQUITA VCMT 110304-MM PH5115 INSERT VCMT 221-MM PH5115 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 01-25
    Vc 126-280
    413-919     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 01-25
    Vc 126-280
    413-919     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
  • 112178067 PLAQUITA VCMT 110304-MM PH6325 INSERT VCMT 221-MM PH6325 Orden
    Coating PVD
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
    Coating PVD
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
  • 112178054 PLAQUITA VCMT 110304-MM PH6910 INSERT VCMT 221-MM PH6910 Orden
    Coating PVD
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 05-10
    Vc 117-219
    384-719     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
    Coating PVD
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 05-10
    Vc 117-219
    384-719     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
  • 112178068 PLAQUITA VCMT 110304-MM PH6920 INSERT VCMT 221-MM PH6920 Orden
    Coating PVD
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 10-25
    Vc 113-205
    371-673     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
    S 10-30
    Vc 28-151
    92-495     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
    Coating PVD
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 10-25
    Vc 113-205
    371-673     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
    S 10-30
    Vc 28-151
    92-495     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
  • 1121754L7 PLAQUITA VCMT 110304-MP PH5115 INSERT VCMT 221-MP PH5115 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
  • 1121754L8 PLAQUITA VCMT 110304-MP PH5125 INSERT VCMT 221-MP PH5125 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,4
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0157
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906     m/min
    sfm
    Fz 0.10-0.25
    0.0039-0.0098     mm/r
    in/r
    ap 0.31-2.55
    0.0122-0.1004     mm
    in
  • 1121753L6 PLAQUITA VCMT 110308-MK PH5320 INSERT VCMT 222-MK PH5320 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,8
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    K 01-25
    Vc 165-363
    541-1191     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0315
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    K 01-25
    Vc 165-363
    541-1191     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
  • 1121753L5 PLAQUITA VCMT 110308-MK PH5705 INSERT VCMT 222-MK PH5705 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,8
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0315
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
  • 1121751L7 PLAQUITA VCMT 110308-MM PH5115 INSERT VCMT 222-MM PH5115 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,8
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 01-25
    Vc 126-280
    413-919     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0315
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 01-25
    Vc 126-280
    413-919     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
  • 112175167 PLAQUITA VCMT 110308-MM PH6325 INSERT VCMT 222-MM PH6325 Orden
    Coating PVD
    D (mm) 6,35
    Re (mm) 0,8
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    Coating PVD
    D (inch) 0,25
    Re (inch) 0,0315
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
  • 112175154 PLAQUITA VCMT 110308-MM PH6910 INSERT VCMT 222-MM PH6910 Orden
    Coating PVD
    D (mm) 6,35
    Re (mm) 0,8
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 05-10
    Vc 117-219
    384-719     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    Coating PVD
    D (inch) 0,25
    Re (inch) 0,0315
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 05-10
    Vc 117-219
    384-719     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
  • 112175168 PLAQUITA VCMT 110308-MM PH6920 INSERT VCMT 222-MM PH6920 Orden
    Coating PVD
    D (mm) 6,35
    Re (mm) 0,8
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    M 10-25
    Vc 113-205
    371-673     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    S 10-30
    Vc 28-151
    92-495     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    Coating PVD
    D (inch) 0,25
    Re (inch) 0,0315
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    M 10-25
    Vc 113-205
    371-673     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    S 10-30
    Vc 28-151
    92-495     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
  • 1121752L7 PLAQUITA VCMT 110308-MP PH5115 INSERT VCMT 222-MP PH5115 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,8
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0315
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
  • 1121752L8 PLAQUITA VCMT 110308-MP PH5125 INSERT VCMT 222-MP PH5125 Orden
    Coating CVD-MT
    D (mm) 6,35
    Re (mm) 0,8
    d1 (mm) 2,8
    S (mm) 3,18
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
    Coating CVD-MT
    D (inch) 0,25
    Re (inch) 0,0315
    d1 (inch) 0,1102
    S (inch) 0,1252
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906     m/min
    sfm
    Fz 0.13-0.33
    0.0051-0.013     mm/r
    in/r
    ap 0.61-2.55
    0.024-0.1004     mm
    in
  • 1121985L5 PLAQUITA VCMT 160402-FK PH5705 INSERT VCMT 330.5-FK PH5705 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    K 05-15
    Vc 184-403
    604-1322     m/min
    sfm
    Fz 0.04-0.14
    0.0016-0.0055     mm/r
    in/r
    ap 0.07-1.80
    0.0028-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0079
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    K 05-15
    Vc 184-403
    604-1322     m/min
    sfm
    Fz 0.04-0.14
    0.0016-0.0055     mm/r
    in/r
    ap 0.07-1.80
    0.0028-0.0709     mm
    in
  • 1121981L8 PLAQUITA VCMT 160402-FM PH5125 INSERT VCMT 330.5-FM PH5125 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 05-30
    Vc 124-267
    407-876     m/min
    sfm
    Fz 0.04-0.14
    0.0016-0.0055     mm/r
    in/r
    ap 0.07-1.80
    0.0028-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0079
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 05-30
    Vc 124-267
    407-876     m/min
    sfm
    Fz 0.04-0.14
    0.0016-0.0055     mm/r
    in/r
    ap 0.07-1.80
    0.0028-0.0709     mm
    in
  • 112198167 PLAQUITA VCMT 160402-FM PH6325 INSERT VCMT 330.5-FM PH6325 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 0,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 10-30
    Vc 115-212
    377-696     m/min
    sfm
    Fz 0.04-0.14
    0.0016-0.0055     mm/r
    in/r
    ap 0.07-1.80
    0.0028-0.0709     mm
    in
    S 05-25
    Vc 45-181
    148-594     m/min
    sfm
    Fz 0.04-0.14
    0.0016-0.0055     mm/r
    in/r
    ap 0.07-1.80
    0.0028-0.0709     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0079
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 10-30
    Vc 115-212
    377-696     m/min
    sfm
    Fz 0.04-0.14
    0.0016-0.0055     mm/r
    in/r
    ap 0.07-1.80
    0.0028-0.0709     mm
    in
    S 05-25
    Vc 45-181
    148-594     m/min
    sfm
    Fz 0.04-0.14
    0.0016-0.0055     mm/r
    in/r
    ap 0.07-1.80
    0.0028-0.0709     mm
    in
  • 1121977L8 PLAQUITA VCMT 160402-FP PH5125 INSERT VCMT 330.5-FP PH5125 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 10-35
    Vc 131-290
    430-951     m/min
    sfm
    Fz 0.04-0.14
    0.0016-0.0055     mm/r
    in/r
    ap 0.07-1.80
    0.0028-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0079
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 10-35
    Vc 131-290
    430-951     m/min
    sfm
    Fz 0.04-0.14
    0.0016-0.0055     mm/r
    in/r
    ap 0.07-1.80
    0.0028-0.0709     mm
    in
  • 1121986L5 PLAQUITA VCMT 160404-FK PH5705 INSERT VCMT 331-FK PH5705 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    K 05-15
    Vc 179-382
    587-1253     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    K 05-15
    Vc 179-382
    587-1253     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
  • 1121982L8 PLAQUITA VCMT 160404-FM PH5125 INSERT VCMT 331-FM PH5125 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 05-30
    Vc 121-253
    397-830     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 05-30
    Vc 121-253
    397-830     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
  • 112198267 PLAQUITA VCMT 160404-FM PH6325 INSERT VCMT 331-FM PH6325 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 10-30
    Vc 112-201
    367-659     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
    S 05-25
    Vc 40-159
    131-522     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 10-30
    Vc 112-201
    367-659     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
    S 05-25
    Vc 40-159
    131-522     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
  • 112198254 PLAQUITA VCMT 160404-FM PH6910 INSERT VCMT 331-FM PH6910 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 05-10
    Vc 121-219
    397-719     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 05-10
    Vc 121-219
    397-719     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
  • 1121978L7 PLAQUITA VCMT 160404-FP PH5115 INSERT VCMT 331-FP PH5115 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 01-30
    Vc 136-304
    446-997     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 01-30
    Vc 136-304
    446-997     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
  • 1121978L8 PLAQUITA VCMT 160404-FP PH5125 INSERT VCMT 331-FP PH5125 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 10-35
    Vc 127-276
    417-906     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 10-35
    Vc 127-276
    417-906     m/min
    sfm
    Fz 0.05-0.20
    0.002-0.0079     mm/r
    in/r
    ap 0.10-1.80
    0.0039-0.0709     mm
    in
  • 1121994L6 PLAQUITA VCMT 160404-MK PH5320 INSERT VCMT 331-MK PH5320 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    K 01-25
    Vc 170-363
    558-1191     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    K 01-25
    Vc 170-363
    558-1191     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
  • 1121994L5 PLAQUITA VCMT 160404-MK PH5705 INSERT VCMT 331-MK PH5705 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    K 05-15
    Vc 179-382
    587-1253     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    K 05-15
    Vc 179-382
    587-1253     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
  • 1121991L7 PLAQUITA VCMT 160404-MM PH5115 INSERT VCMT 331-MM PH5115 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 01-25
    Vc 130-280
    427-919     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 01-25
    Vc 130-280
    427-919     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
  • 112199167 PLAQUITA VCMT 160404-MM PH6325 INSERT VCMT 331-MM PH6325 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 10-30
    Vc 112-201
    367-659     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
    S 05-25
    Vc 40-159
    131-522     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 10-30
    Vc 112-201
    367-659     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
    S 05-25
    Vc 40-159
    131-522     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
  • 112199154 PLAQUITA VCMT 160404-MM PH6910 INSERT VCMT 331-MM PH6910 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 05-10
    Vc 121-219
    397-719     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 05-10
    Vc 121-219
    397-719     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
  • 1121988L7 PLAQUITA VCMT 160404-MP PH5115 INSERT VCMT 331-MP PH5115 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 01-30
    Vc 136-304
    446-997     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 01-30
    Vc 136-304
    446-997     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
  • 1121988L8 PLAQUITA VCMT 160404-MP PH5125 INSERT VCMT 331-MP PH5125 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,4
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 10-35
    Vc 127-276
    417-906     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0157
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 10-35
    Vc 127-276
    417-906     m/min
    sfm
    Fz 0.07-0.20
    0.0028-0.0079     mm/r
    in/r
    ap 0.23-2.70
    0.0091-0.1063     mm
    in
  • 1121987L5 PLAQUITA VCMT 160408-FK PH5705 INSERT VCMT 332-FK PH5705 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 1121983L8 PLAQUITA VCMT 160408-FM PH5125 INSERT VCMT 332-FM PH5125 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 05-30
    Vc 117-253
    384-830     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 05-30
    Vc 117-253
    384-830     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 112198367 PLAQUITA VCMT 160408-FM PH6325 INSERT VCMT 332-FM PH6325 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 112198354 PLAQUITA VCMT 160408-FM PH6910 INSERT VCMT 332-FM PH6910 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 05-10
    Vc 117-219
    384-719     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 05-10
    Vc 117-219
    384-719     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 112198368 PLAQUITA VCMT 160408-FM PH6920 INSERT VCMT 332-FM PH6920 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 10-25
    Vc 113-205
    371-673     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    S 10-30
    Vc 28-151
    92-495     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 10-25
    Vc 113-205
    371-673     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    S 10-30
    Vc 28-151
    92-495     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 1121979L7 PLAQUITA VCMT 160408-FP PH5115 INSERT VCMT 332-FP PH5115 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 1121979L8 PLAQUITA VCMT 160408-FP PH5125 INSERT VCMT 332-FP PH5125 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906     m/min
    sfm
    Fz 0.07-0.27
    0.0028-0.0106     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 1121995L6 PLAQUITA VCMT 160408-MK PH5320 INSERT VCMT 332-MK PH5320 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    K 01-25
    Vc 165-363
    541-1191     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    K 01-25
    Vc 165-363
    541-1191     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
  • 1121995L5 PLAQUITA VCMT 160408-MK PH5705 INSERT VCMT 332-MK PH5705 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
  • 1121992L7 PLAQUITA VCMT 160408-MM PH5115 INSERT VCMT 332-MM PH5115 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 01-25
    Vc 126-280
    413-919     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 01-25
    Vc 126-280
    413-919     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
  • 112199267 PLAQUITA VCMT 160408-MM PH6325 INSERT VCMT 332-MM PH6325 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
  • 112199254 PLAQUITA VCMT 160408-MM PH6910 INSERT VCMT 332-MM PH6910 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 05-10
    Vc 117-219
    384-719     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 05-10
    Vc 117-219
    384-719     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
  • 1121989L7 PLAQUITA VCMT 160408-MP PH5115 INSERT VCMT 332-MP PH5115 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
  • 1121989L8 PLAQUITA VCMT 160408-MP PH5125 INSERT VCMT 332-MP PH5125 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 0,8
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0315
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906     m/min
    sfm
    Fz 0.09-0.27
    0.0035-0.0106     mm/r
    in/r
    ap 0.45-2.70
    0.0177-0.1063     mm
    in
  • 1121984L8 PLAQUITA VCMT 160412-FM PH5125 INSERT VCMT 333-FM PH5125 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 05-30
    Vc 117-253
    384-830     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 05-30
    Vc 117-253
    384-830     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 112198467 PLAQUITA VCMT 160412-FM PH6325 INSERT VCMT 333-FM PH6325 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 112198454 PLAQUITA VCMT 160412-FM PH6910 INSERT VCMT 333-FM PH6910 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 05-10
    Vc 117-219
    384-719     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 05-10
    Vc 117-219
    384-719     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 112198468 PLAQUITA VCMT 160412-FM PH6920 INSERT VCMT 333-FM PH6920 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 10-25
    Vc 113-205
    371-673     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    S 10-30
    Vc 28-151
    92-495     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 10-25
    Vc 113-205
    371-673     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    S 10-30
    Vc 28-151
    92-495     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 1121980L7 PLAQUITA VCMT 160412-FP PH5115 INSERT VCMT 333-FP PH5115 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.09-0.32
    0.0035-0.0126     mm/r
    in/r
    ap 0.14-1.80
    0.0055-0.0709     mm
    in
  • 1121996L6 PLAQUITA VCMT 160412-MK PH5320 INSERT VCMT 333-MK PH5320 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    K 01-25
    Vc 165-363
    541-1191     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    K 01-25
    Vc 165-363
    541-1191     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
  • 1121996L5 PLAQUITA VCMT 160412-MK PH5705 INSERT VCMT 333-MK PH5705 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
  • 1121993L7 PLAQUITA VCMT 160412-MM PH5115 INSERT VCMT 333-MM PH5115 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 01-25
    Vc 126-280
    413-919     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 01-25
    Vc 126-280
    413-919     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
  • 112199367 PLAQUITA VCMT 160412-MM PH6325 INSERT VCMT 333-MM PH6325 Orden
    Coating PVD
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
    Coating PVD
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    M 10-30
    Vc 108-201
    354-659     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
    S 05-25
    Vc 35-159
    115-522     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
  • 1121990L7 PLAQUITA VCMT 160412-MP PH5115 INSERT VCMT 333-MP PH5115 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
  • 1121990L8 PLAQUITA VCMT 160412-MP PH5125 INSERT VCMT 333-MP PH5125 Orden
    Coating CVD-MT
    D (mm) 9,525
    Re (mm) 1,2
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
    Coating CVD-MT
    D (inch) 0,375
    Re (inch) 0,0472
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906     m/min
    sfm
    Fz 0.11-0.32
    0.0043-0.0126     mm/r
    in/r
    ap 0.54-2.70
    0.0213-0.1063     mm
    in
productos relacionados
Para entrar en contacto con nuestros representantes
El correo electrónico no es válido
Ok Cancelar